Handsfree Car Kit for Sony Ericsson
T10, T10sc, T18, T18d, T18s, T18z, T18sc, T18LX, T19LX, LX588,AF738,
AF778,CF788, EF738, CF768, GF768,GF788,KF788,LX788, PF768 & all 700
wireless phone
Equivalent to original Ericsson HF6100
At
88
Factory Discount Outletyou'll find this is the
best place to buy top quality cell phone
accessory and wireless accessory at low discounted price.
We are now hands free for your
T-10, T-10sc, T-18, T-18d, T-18s, T-18z, T-18sc, T-18LX, T-19LX, LX-588,AF-738,
AF778,CF788, EF738, CF768, GF768,G-788,KF788,LX788, PF768 & all 700
Handsfree, Car Charger & Phone Holder 3 in 1.
Vehicle Cigarette Lighter Adaptor (12~24v DC).
Rapid battery charging for all Ni-MH and Li-ion
batteries.
Increase the driving safety.
Item#HF788
Factory Direct Price: $48.00
A. Speaker
B. Release
C. Microphone
D. Power LED
E. Power Socket
F. Phone Connector Socket
G. Phone Connector
H. Volume Adjuster
Holder
1. Setting Phone to Holder, then snap Fastening Arm (I) to fix phone.
2. Press Release Button (B) will release Fastening Arm (I)
Cigarette Bracket
A. For the vehicle that the cigareet lighter on the plane of shift.
1. Slide the Cigarette Bracket onto the holder byu arrow direction (Fig 2-1)
2. The Flex Neck (N) can be bent in all direction to allow the plug to fit
in most cars.
3. Connect the Cigarette Plug (M) into lighter (Fig 2-2)
B. For the Vehicle that the Cigarette lighter on the plane of dashboard:
1. Slide the Cigarette Bracket onto the holder by arrow directions (Fig 3-1)
2. The Flex Neck (N) can be bent in all directions to allow the plug to fit
in most cars.
3.Connect the Cigarette Plug (M) into lighter.
Mini Mount
1. Select a position for Mini Mount then clean the surface with rubbing
alcohol. ( any dirt or oil left on surface will effect the strength of
bonding)
2. Remove the film of the rape on the Mini Mount and carefully place in
position.
3.Allow the tape to cure for apr.70hours before putting to much pressure.
4.Insert the Mounting Plate onto the Mini Mount to fit the Cigarette
Bracket
5Press tabs on both sides of Mounting Plate then take the Cigarette
Bracket away.
*Handsfree Function
1. Pre-Use: It is necessary to release the original locked handsfree program
of your cellular phone before using this product. Please contact the local
agent of your cellular phone for detail information.
2. Connect Phone Connector with your phone and adjust phone volume to Max.
volume.
3. Start Engine first, then connect the Power Plug (o) into power socket
(E), the power LED light will on.
4. To make a call press dial as normal on the phone’s key pad. Note: It is
normal for some phones that there is no dialing tone coming from hands free
speaker.
5. To receive a call press SEND or whichever button normally answer a call.
6. Then simply speak into the microphone and your voice will be on to your
caller. Your callers voice will broadcast on the speaker.
7. Note: (1) If the voice of the other end is smaller, please adjust the
microphone level (J) to H
(2) If intermittent voice comes from the other end, please adjust the
Microphone Level J to L.
(3) If intermittent voice comes from the speaker, please adjust the volume
adjuster (H) to more high.
8. Speaker volume can be adjusted by volume adjuster.
9. For private purpose microphone-mic piece (optional) can be used by plug
into Earphone Socket (K)
Shipping and handling charge for wireless phone
accessory
All cellular accessory orders made in the US will be subject to a $4.95 shipping charge for
the first item and $.50 for per additional item. And all cell phone accessory orders made in the US
will be shipped by US Postal Service / UPS. (click here for shipping detail)
All International orders
will be subject to a shipping fee of $7.00 per item. All shipping charges
will be manually changed to reflect correct shipping charges.
Home
